H100-188 H100-189 Technical parameters: storage temperature -54 ~ 71 ℃ ambient temperature -40 to 71 ° C; 520-525.700-706 type: -18 to 71 ° C ambient temperature changes every 28 ° C setpoint typical drift does not exceed 1% of the set point repeatability temperature switch: adjustable within ± 1% pressure switch 171-174.218.270-376.520-535.700-706.560-564 of models such as adjustable range of ± 1; 190-194.183-189.483 -489.565-567.610-680.490-494 models such as the adjustable range of ± 1.5%; pressure switch has internal set-point locking device impact resistance reproducible set-point anti-vibration by 15G, 10 millisecond cycle test. 2.5G, 5 ~ 500HZ vibration test, reproducible set point shell die-cast aluminum alloy (copper up to 0.6%) with epoxy coated stainless steel anti-jamming scale cover with gasket. clamping screw shell level in line with NEMA4X . IP65 requirements switching output fast action of a single-pole double-throw (SPDT) switch can be connected as normally open "or" normally closed electrical rating of 15 amps 125/250/480 VAC weight in 2 to 7 pounds (depending on model dependent) electrical connections 1/2 "NPTF interface; 2 7/8" diameter punching pressure connector 1/4 "NPTF; 171-194.483-489.520-535 models such as the 1/2" NPTF; 560-564 type 2 "Sanitary connection; 565-567 type 1 1/2" Sanitary connection temperature components bulb and capillary: 6 feet 304 stainless steel line: nickel-plated brass (standard length). optional 316L stainless steel F-type switch filling non-toxic oil temperature dead under laboratory conditions. typical value set point range 1% B, C, E-type switch, compared with 2% heat-seeking or frost protection thermometer specifically for frost protection application and design. B100 and E100 switch can be used to the surroundings detection technology parameters listed on roughly the same as just B100-13546-electric rated at 22 amps / 480 volts AC switch; E100-13545 type switch electrical rating of 22 A / 480 VAC size 10-foot-long stainless steel capillary H100-188 H100-189