UE100 series vacuum switches pressure switches H100-218 H100-530 U.S. UE vacuum switches pressure switches 

 The UE 100 Series vacuum switch performance ratio is very good pressure switch, is widely used in industrial process design and integration of OEM customers and the shell of the switch fabric to make it more sturdy vacuum switch wiring more convenient. Weather series vacuum switch with a variety of micro-switches and a variety of process interface options to meet the various needs. The vacuum switch using its own characteristics, the 100 series vacuum switches are widely used in thermal tracking, frost protection, process equipment (pumps, compressors), alarm pad to enter flame blocking system. 

 The following are the main features of the UE 100 Series vacuum switch: 

 ● The vacuum switch is a SPDT output 
 ● rugged pressure, vacuum, pressure and temperature switches 
 ● medium compatible with a wide range of types of pressure sensing components 
 ● The vacuum switch is epoxy shell, designed to meet the requirements of NEMA 4 X / IP 65 
 ● hot track and low temperature protection temperature patterns 
 ● vacuum switch designed for adjustable deadband switch of the pump design 

 100 Series Universal UE vacuum switch parameters are as follows: 

 Storage Temperature: -54 to 71 degrees 

 Ambient temperature: -40 to 71 degrees :520-548 ,700-706: -18 to 71 degrees; ambient temperature change of 28 degrees, set point typical drift value is less than the full range of 1% E121 and E122 type drift value is less than 2%; 

 Set point repeatability: temperature switch: adjustable range of plus or minus 1 percent; pressure switch :15623,171-174 ,218,270-376 ,520-535 ,540-543 ,700-706 ,560-564 Model adjustable range of plus or minus 1 percent; 190-194,183-189,483-494,544-548,565-567,610-680 other models for the adjustable range of plus or minus 1.5%; all the pressure switch has an internal set-point locking device. 

 Shock: 10 ms, 15G impact test, you can reproduce the set point 

 Anti-vibration: by 2.5G, 5-500Hz vibration experiments can reproduce the set point 

 Housing: Die cast aluminum die casting shell; epoxy coating: with gasket, stainless steel anti-interference scale cover clamping screws; 

 Enclosure Rating: comply with NEMA 4X requirements 

 Switch Output: a fast-action single-pole double-throw (SPDT) switch; may be wired "normally open" or "normally closed" 

 Power rating: 15A, 125/250/480VAC; H100-15623; 20A, 125/250/480VAC; B100-13546 and the E100-13 545; 22A/480VAC 

 Weight :2-7 pounds; (varies by model) 

 Electrical interface: 1/2 "NPTF interface; 2 7/8" diameter knockout holes 

 Pressure port :15623,218,270-376 ,610-680 ,701-706 type; 1/4 "NPTF; 171-194,483-494,520-535 type; 1/2" NPFT 540-548 type; a / 8 "NPTF; 560-564 type; 2" hygienic connections 565-567; 1.5 Health Level Connection 

 Temperature components: the bulb and capillary: 6 feet, 304 stainless steel; the E100-13 545; 10 feet and 304 stainless steel in-line; nickel-plated brass (standard length); optional 316L stainless steel 

 Fill: 1BS/BC type: fill the solvent :2-8: Fill the non-toxic oil 

 Temperature dead zone: F-type; is typically 1%; B, C, E,: under laboratory conditions, typically 2% of set point range; 

 Heat tracing and low temperature protection: thermostat is designed specifically for the application of heat tracing and low temperature protection, B100 and E100 models switch can be used to track surrounding environment.